Card each container
Set up the items, line locations and fixed refill quantities you already use. Each reusable container gets a permanent card with a barcode, so the same container always means the same item, quantity and destination.
LINE-SIDE REPLENISHMENT FROM A SCAN
RefillFlow turns an empty container at the line into a refill request that stores can see, pick and deliver. Scan the container card and confirm. The ticket prints at the right stores, the request appears on the stores board and the line records what arrived. Describe your routing rules in plain English, and approved rules choose the stores queue, priority, ticket printer and escalation for every request.
Free for real production at one station. While SmartFACT is in early access, we set your first workflow up with you.
Approved rules route each request as written and cannot change the item or refill quantity.
For factories whose stores refill repeat consumables, packaging or standard parts at fixed places on the line, using cards, calls or a spreadsheet today.
AUTOMATION FROM PLAIN ENGLISH
Your stores team already knows which store supplies which line, what counts as urgent and when a request has waited too long. Describe it in plain English. SmartFACT turns it into a rule that sets the stores queue, priority, due time, ticket printer and escalation for each request. You test it against example requests and approve the release. On the floor, the rules run as approved, with no AI call when anyone scans, picks or receives. A request no rule covers uses the default route set in the release, and a request the rules cannot check is stopped with a reason instead of being guessed.
How your rules become automationREFILLFLOW · ILLUSTRATION
After one scan and a confirmation, stores sees the request, the ticket prints there and the line knows the refill has been asked for.
Fictional examples. This illustration does not create a request or print a ticket.
Change the container to see what reaches stores.
HOW IT WORKS
A container runs empty at the line. Someone walks to stores, phones, sends a message or drops a card in a tray. Stores may or may not have seen it, and nobody knows whether the refill is on its way until it arrives. RefillFlow turns each empty container into one owned request, with a ticket at stores and a visible state from request to receipt.
Set up the items, line locations and fixed refill quantities you already use. Each reusable container gets a permanent card with a barcode, so the same container always means the same item, quantity and destination.
At the floor station, the operator scans the container card and confirms the request. If a refill is already open for that container, the station shows its progress instead of asking again.
The ticket prints on the stores printer and the request appears on the stores board. Stores accepts, picks and dispatches it, and the line scans the delivery to record exactly what arrived.
THE SERVICE
Scanning a container that is already waiting shows the existing request, so a repeated scan does not send stores a second refill.
Each request prints a refill ticket on the stores printer through SmartFACT PrintStation, with nobody standing at the printer. If printing fails, the request stays on the board and stores can work from there.
Requested, accepted, picking, awaiting receipt and exceptions, with each request's age, due time, priority and owner. A table view and a signed-in wallboard show the same queue.
Stores can send part of a refill now and the rest later. A shortage is recorded with an owner, a reason and a review time, and the outstanding quantity stays visible until it is supplied.
The line scans the dispatch ticket and the container to record the quantity received. A printed ticket, a stores note or the passing of time does not count as a delivery.
See request-to-receipt times, overdue requests, shortages and print problems by queue and destination. Export your own data at any time, or connect other systems through the read API and event notifications.
IS IT A FIT?
WORKS WITH
Every SmartFACT product keeps its own records. A link between two products is used only when your organisation has both, and is agreed at onboarding.
How the SmartFACT products work together →BEFORE YOU DECIDE
RefillFlow pays back through the work it removes: walking or phoning the stores to ask for a refill, a second request for the same container, deliveries booked to the wrong place or above what was sent, and old cards still in use after a replacement.
We quote no payback period, because it depends on your own volumes and your people’s time.
SmartFACT is a hosted service. It runs in the UK, with database backups encrypted and copied off-site to the EU. Each product keeps its own database.
Access is through SmartFACT Accounts: your organisation's administrator decides who has access to each product and in which role, and while SmartFACT is in early access we enable the organisation and its first users. Every person signs in with their own account; there are no shared station logins, so every approval, correction and release is attributable to a named person. Single sign-on with your own identity provider is not offered.
Your ERP, MRP or factory software connects to SmartFACT Data only, never to a product directly, and Data then supplies the products. Connecting SAP ECC or S/4HANA, an ERP or MRP system, EDI, or software of your own is paid integration work. We scope it with you, price it before work starts and build it through data.smartfact.ai.
While SmartFACT is in early access, we set up your first workflow with your team and stay close while it runs, so problems are fixed fast. Every paid plan includes support by email and ticket during UK business hours, for configuration, data imports, printing and the questions that come up in the first months.
BEFORE YOU START
Tell us what your stores supplies, to how many line locations, and how refills are requested today. While SmartFACT is in early access, we review the fit, enable your organisation through SmartFACT Accounts and set your first loops up with you, free. Submitting the form does not create an account by itself, and no payment is taken.
No. RefillFlow owns the refill request and its delivery, not the stock ledger. Accepting a request does not reserve stock or promise it exists, and recording a delivery does not change your stock records. Keep using your ERP or stock system for quantities on hand.
A browser floor station with a barcode scanner that types like a keyboard, a permanent card on each container, and a label or A4 printer in stores connected through SmartFACT PrintStation. On a phone or tablet, the camera button on each scan field reads the cards too. Stores staff work from the stores board in a browser. Tickets and cards print on 100 × 150 mm labels or A4. If the connection drops, RefillFlow records nothing until it is back, and the page says whether anything may have been saved; checking the outcome of an action that got no answer records it at most once, as the Help article at https://help.smartfact.ai/manuals/refillflow/when-the-network-drops explains. Set-up guides for scanners and label printers, each written from the maker’s own documents, are at https://help.smartfact.ai/manuals/hardware.
RefillFlow uses a permanent barcode card that stays on the container and is scanned at the line, in place of a card that travels to the stores. Each container is fixed to one item, one line location and one refill quantity, which its card shows, and the scan only prepares the request: the operator checks it and confirms on purpose. If a card is lost, a supervisor issues a replacement and the old card stops working.
Yes. With RefillFlow the operator scans the empty container’s card at the line and confirms, and the request appears on the stores board, oldest first, with its age, due time, priority and who accepted it. Each stores queue prints its tickets through SmartFACT PrintStation, either unattended at a checked printer or when someone chooses Print, and a signed-in wallboard shows the open requests.
RefillFlow records a delivery when the line scans the dispatch ticket and the container card at the right location and enters what arrived. A wrong location, or more than was sent, is refused, and a request completes only when its full quantity is received. Reports show the time from request to acceptance, to first receipt and to completion, with overdue requests and those finished late.
Stores dispatches what it has and records a shortage with a reason, an owner and a time to review it. The rest stays outstanding on the board and on the container until it is supplied, or until a supervisor closes the request short with the actual amount recorded.
The request is already recorded. It stays on the stores board with a print exception, stores can pick from the board, and an authorised person can reprint or print at another approved printer.
No. AI helps turn your plain English routing rule into a precise condition during setup. Your team tests and approves it. On the floor, RefillFlow applies the rule as approved, without calling an AI model. A rule can choose only from your approved stores queues, printers and escalation policies. It cannot change the item, quantity or destination.
Nothing is duplicated. Scanning a container with an open request shows that request and its progress. A new request needs a deliberate confirmation, and a dropped connection does not turn into a second request, because the station checks what was recorded before it does anything else.
Yes. RefillFlow includes a sample site with fictional items, containers and stores, so your team can practise requests, picking and receipt. It prints nothing and sends nothing to your systems.
Nothing to start: the free tier covers real production at one floor station. You pay when your use passes its thresholds, or when you want support or development. There is no charge per scan, refill or ticket.
IN MORE DETAIL
An e-kanban system replaces paper kanban cards with a scan of the empty container, which sends the refill request straight to stores. See how RefillFlow runs it.
02E-kanban works in three steps: scan the empty container at the line, send the refill request straight to stores, then pick, deliver and receive it in view.
03Automatic ticket printing means the refill ticket comes off the stores printer the moment the line asks for material. RefillFlow prints through PrintStation.
04An e-kanban board shows every open refill as it moves, with its item, quantity and container. RefillFlow’s stores board and line station show the same request.
05Kanban replenishment rules decide where each refill request goes and how fast. See how RefillFlow routes every request with approved rules.
FREE TIER
Tell us what your stores supplies, where it goes on the line and how refills are requested today. We review the fit and get your first refill loop running.
Free at one station. Set up with you while SmartFACT is in early access.
THE SMARTFACT SUITE
Automate factory decisions with rules you describe in plain English. Explore focused SmartFACT services, plus free tools for everyday checks. The free tools need no account.
See the text and key events your keyboard scanner sends. Compare them with the value you expected.
Test a scannerPrint a known PDF, measure its reference marks and compare scans from the printed codes.
Check a printCreate 100 × 50 mm bin and rack cards with Code 128 or QR, from one record or a CSV.
Make bin cardsCount stock by location with a barcode scanner, compare it with a stock file and export the results.
Start a free countSee exactly what a scanned barcode contains, with hidden characters shown and GS1 fields, check digits and dates explained.
Inspect a barcodeScan a reference and each label, see an exact match or the first difference, and download the results.
Start a free comparisonScan an item or location, note what needs attention, print a review tag and keep a review list.
Make a free tagLoad your own parts and locations CSV, scan a code and see every location it lists.
Start a free lookupCheck cartons, pallets or serial numbers against a list with a phone or scanner and see what is missing.
Start a free checkCheck CSV and JSON files exactly as written, preview a column mapping and compare two versions by key.
Check a file freeTime work cycles and changeovers on a phone, record interruptions with reasons and download the results.
Start a free studyLabel the offcuts on your rack, find a piece long enough before cutting new stock and record what you used.
Track offcuts freeLoad one or two CSV exports and follow a lot or serial forwards or backwards, with the row behind every link.
Start a free traceRecord the parts recovered from each return, label them with a QR code, check them and record the unit each one goes into.
Track recovered parts freeDescribe label rules in plain English. Automatically select layouts, resolve customer codes and check each job before printing.
Explore LabelRulesTurn plain English component rules into automatic kit checklists, then check scans against the expected parts and quantities.
Explore KitProofTurn plain English rules into automatic step selection for each unit, with required evidence and a record of completed work.
Explore WorkStepsApply approved product rules and calculations automatically to turn dimensions and options into manufacturing requirements.
Explore FactorySpecMaintain reference tables with ConfigSheets or bring shop orders into SmartFACT through reviewed connectors. Check changes and deliver data to the products that use it.
Explore SmartFACT DataTurn plain English rules into automatic order checks and destination selection, with controlled production release.
Explore OrderRunScan the work order and the parcel choice to book the courier and print the labels. Approved plain English rules recommend or choose the parcel.
Explore ParcelOfficeScan an empty container to send the right refill request to stores. Approved plain English rules set the stores queue, priority, ticket printer and escalation.
Start freeLabel each offcut, find a suitable length before cutting new stock and record what you used. Approved plain English rules decide what to keep and where it goes.
Explore RemnantRackCheck a shared tool before handover, record who has it and keep damaged or overdue tools out of the next issue. Start free with one crib.
Explore ToolCustodyReceive, put away, reserve and issue stores material with barcode checks, keeping held, reserved and available stock apart. Start free with one stockroom.
Explore StoresFlowFollow a lot or serial number through the records your factory already keeps, with the source of each link and the gaps shown. Start free with two declared sources.
Explore LotTrailScan an identified unit to get its approved final-inspection checks, then record exact readings with their result, holds and release history.
Explore CheckStationBook returned units in, recover and label the usable parts, release them independently and record the unit each goes into. Start free with one product family.
Explore ReclaimStationGenerate GUIDs, UUID v4 and v7, ULIDs and Nano IDs, format and download batches, or inspect a UUID in your browser.
Generate identifiersInspect and edit text, hex, Base64 and binary bytes in your browser, reveal hidden characters and compare byte sequences.
Inspect some bytesTest JavaScript regular expressions in your browser, inspect matches and captures, preview replacements and check expected cases.
Test a patternCollect purchase requests, approve supplier orders and track what is still to arrive. Start free at one site.
Explore PurchasingDescribe, test, approve and audit the automation rules of every SmartFACT product in one place. Included with each product’s paid plan, or on its own.
Explore AutomationStep-by-step guides and interactive demonstrations for the SmartFACT suite. Read the instructions, watch a task or practise with real product screens and sample data.
Open SmartFACT Help